Description

This fixture has the KME 135mm pallet interface for mounting directly with the following KME 5-Axis Tombstones: (KME-TS300-2.0 300mm; KME-TS400-4.0 400mm; and KME-TS500-4.0 500mm. Also with the following KME 5-Axis Trunnions (KME-TR100; KME-TR200; and KME-TR300). It offers superior clamping strength while allowing access to five sides of the workpiece. The RWP-036SS is manufactured from 17-4 Stainless Steel Heat Treated to H-1150. The fixture clamps are made from 17-4 Stainless Steel. Use Clamp Replacement RWP-CL302SQ. Raptor Dovetail Fixtures are made to hold your part on four and five-axis CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece– Most features can be completed in a single operation. Our unique Raptor Dovetail spring-loaded clamps require only .125″ of material to hold the workpiece. That means less waste, easier prep and no distortion. You prepare all your parts with a single dovetail and utilize the same fixture for every part.

With Raptor, you can run a wide variety of parts and eliminate the changeover time. There is no need to spend time removing and replacing custom fixtures in your machines. We simplified the process! Smaller Raptor Fixtures can also be attached to larger ones, allowing you to switch to any size part as fast as you can turn a hand tool. Our adapters and risers allow you to attach Raptor Workholding products to any four or five-axis CNC machine. We have a variety of adapters, risers, and fixtures built to attach directly to the most popular CNC machines. Multiple Raptors can be mounted to tombstones, bridges, carousels, nests and base plates.

Have a need for an EDM Application? Our stainless steel fixtures and clamps are made from 17-4 stainless steel; Heat Treat: H-1150 / Rockwell Hardness Approximate 28. Switch from a standard application to an EDM application in a single step: simply substitute the clamping system socket head cap screws from alloy steel to stainless steel.

Additional information