Skip to content

Products

Cool-Space 400

$3,499.00SRP:$4,299.00

Variable Speed Portable Evaporative Cooler with an Air Flow range of 6,400 – 9,700 Max CFM, and a cooling coverage up to 3,600 sq. ft. with a Water Resevoir of 46 gallons. Ultra-quiet performance with only 61 db(A) @ 5 ft. Proudly made in Fortville, Indiana, USA!

FREE FREIGHT SHIPPING: This item will be delivered at no additional cost to you.

Your item will drop-ship from the manufacturer. Due to unprecedented material and labor shortages nationwide shipping lead times may be longer than normal. In advance, thanks for your patience. Rest assured we will do everything possible to expedite the shipment of your order.

Part/Model Number: COOL-F-EV1-3601 Categories: , , ,

Description

Cool-Space is perfect for cooling open and well-ventilated spaces that allow the cooler to draw in plenty of fresh warm air to cool your space. A Cool-Space portable evaporative cooler can get cooling where you need it so you aren’t wasting money and energy cooling unoccupied areas. The Cool-Space 400 has a sleek, yet durable, design and will cool an area of up to 3,600 square feet. All you need is an outlet and a standard garden hose and you’re ready to fill up, plug in, and cool down. Don’t miss these great features: the variable speed, direct drive is completely portable with a thick, UV resistant housing that will not leak or rust; a large 46 gallon built-in water reservoir that offers hours of operation without a water supply connection. This well-designed portable evaporative cooler is built with durable, high quality components so that we can offer our tough, long-lasting, industry-best portable evaporative coolers.

This model features 8″ thick cross-corrugated, angle-fluted formulated cellulose cooling media to provide effective cooling and air distribution, and edge-coated with thermosetting resin giving additional strength and protection from growth of algae or mildew. The heart of a portable evaporative cooler is the cooling media or the “pads” that are soaked with water and provide the cooling effect. Because hot air is forced through these pads, the thicker the pads are the more surface area there is available to cool the air, increasing the temperature drop. All evaporative coolers use water pumps in their reservoirs to pump water to the top of the cooling media so water flows down evenly. However, when the water source is turned off or running low, the pump could reach a point where it could be damaged. Cool-Space provides a low water shut-off on its submersible pump. This low water shut-off keeps the pump from overheating and preventing damage to the pump.

The Inlet Water Pressure Supply requires a max of 120 psi. The Operating Temperature of our unit is 0 to 104° F (-18 to 40° C). The motor is totally enclosed; 120 VAC, 60 Hz, and draws 8.0A (15A Breaker required) with a 10 ft. ground fault protected power cord which has a cord wrap for easy storage. Cool-Space has a cap for easy access to the reservoir for water treatment additives such as CTT or REFRESH Tablets. Therefore, you do not have to take out the cooling media to gain access to the reservoir. Cool-Space also has a drain plug on all models for convenient draining. Outside dimensions are 62″ Wide x 31″ Deep x 70″ High. Invest in your employees’ safety and improve productivity – buy Cool-Space!

Additional information

Shipping Weight 220.00 lbs
Dimensions 31 × 62 × 70 in
Pack Quantity 1
Assembly Required No
Skid Yes
Sign up for updates and promotions: